Ok. Now that I've got the new primary spring in the clutch I'm looking at the belt and it seems it has a lot of slop. What is the proper procedure for setting them up? I know they aren't supposed to be tight. Is there a procedure to get it set up right? The secondary is good, the belt is about a 1/16 below the outside of the clutch. It seems like it would take quite a bit of clutch movement/RPM to get it to grab.
My SkiDoo seems to have much less slack, like it will grab just off the bottom of the sheaves (I think that's what the sides of the clutches are called). Looking at the cat it looks like the belt will grab about a 1/4? Of the way up the clutch! The belt looks good and shows no signs of cracking, or excess wear.
My SkiDoo seems to have much less slack, like it will grab just off the bottom of the sheaves (I think that's what the sides of the clutches are called). Looking at the cat it looks like the belt will grab about a 1/4? Of the way up the clutch! The belt looks good and shows no signs of cracking, or excess wear.
Setting belt tension 98 AC ZL500
0 commentaires:
Enregistrer un commentaire